Skip to content
Pool cues come in various sizes and shapes. The tip of the cue determines its function. For example, a straight pool cue has a longer tip than a bent or curved one. If you want to replace the tip of your pool cue, you should choose the correct size.
A pool cue tip is the part of the cue stick that contacts the ball. It helps determine the direction and speed of the shot. When replacing the tip of your pool cues, you should consider the length of the new tip.
Also Read: How Long Does A Pool Cue Lasts?
Steps to Replace Pool Cue Tip
Here are the steps you should follow to replace the pool cure tip:
1. Use a Razor Blade to Peel Off the Old Tip.
- First, you must get rid of the previous tip.
- For this, you’ll require a sharp, well-cut razor (please be cautious it’s difficult to explain the process of cutting off your finger to change your Cue Tip.
- Make sure you reach as close to the ferrule as you possibly can.
- It may require a few passes using the blade. Be patient and gradually remove any glue and leather.
2. Scrapping Off The Remaining Glue
- When you are happy with the job you’ve done taking off the old tip, it is important to ensure that the ferrule’s top is as clean and flat as it is possible.
- For this, you’ll apply the quick top sander, which is part of your repair kit.
- Place the shaft and turn it around until left-over glue and dirt is taken off the ferrule’s top.
- Make sure you keep the sander clean and level.
3. Smoothen the Cue End for a Clean Surface
- The tip preparation is an important step. To prepare it, grab your preferred tip and apply a sandpaper pad to roughen part of your leather that is glue.
- I do this by placing the sandpaper over a smooth surface. I ensure that as I sand back the edge of the tip, I make sure to make sure it stays level and flat.
- The tip should be sanded until it’s smooth and even. It is crucial to ensure you rough it so that the glue has something to stick to.
- Apply the adhesive of your choice to the tip (I also suggest any kind of super glue that is gel) onto the edge.
4. Adding the New Tip to the Cue End
- Put the tip onto the ferrule. Be sure to place the tip in the best position you can.
- Make sure to press the tip firmly to ensure that the air pockets are eliminated.
- The glue will then push across the ferrule.
- While you are holding the tip in place make use of a towel to remove away the glue, which is probably gotten onto the ferrule.
- The more you can clean it off the ferrule, the less you need to think about how to remove it later.
- After that, put together the tip clamp included in your kit. The clamp slides over the shaft.
- As it is evident in this image you just need to place the rubber band at the middle of the tip and then pull the clamp downwards.
- Make use of the slider to secure the clamp in its place.
- The glue should dry for 10 to 15 mins.
Also Read: How To Hold A Cue Tip?
5. Cutting and sanding the Cue Tip
The next step is one that requires patience and a bit of practice: cutting the tip in line with the diameter of the ferrule.
- I recommend placing the ferrule on a firm surface with the tip facing down.
- Utilize the razor blade slowly to cut away the edges of the shaft.
- Do not try to remove more than you can handle at one time. It’s easier to work in a slow manner.
- As you progress, you can use the ferrule to guide you.
- Cut downwards toward the table in a straight line as you possibly can. As a side note, make sure you don’t cut the dining table in your kitchen.
- Once you’ve got the tip of the blade with the same diameter as the ferrule, make it cleaner and get rid of any flat spots that are left on the blade by using an 800 grit sandpaper.
- Be cautious not to rub too hard on the ferrule.
Also Read: How To Clean A Pool Cue?
6. Shaping the Pool Cue Tip
You now have a piece of metal firmly glued on with the same diameter as the ferrule. However, it’s probably flat. Now is the time to shape it.
- Make use of your preferred tip shaper or shaper from the package.
- You can sand the tip until you have the desired shape you like, such as dime, or nickel.
- When you’ve got your tip in shape, you can moisten the tips’ sides (a tiny amount of water will do however, don’t make it too moist).
- Use a fine chunk of leather heat the edges of your tip.
- Add a Smooth Finish to hold its shape
7. Now we have our completed method.
Not everytime, it is possible to connect with an experienced technician to get your cue repaired. These easy steps are an excellent rescue when you are looking for replacing your Pool cue tip.
Things to Consider Before Buying the Right Pool Cue Tip
The first thing you must be aware of is the fact that there’s four types of Pool Cue Tips to think about. Each has advantages and disadvantages. The amount of hardness or density that you is chosen for the pool cue tip depends on the game style.
Another thing to consider is what function will your billiards stick be employed. Are you using it as a playing stick or is it your breaking stick?
1. Medium-Hard Tips
These are the most popular kind that is used for cue tips. This kind of tips are an all-around tip that provides players with an array of cue ball control and durability. In addition, medium-hard tips require less care than soft tips.
2. “Soft” as well as “Super Soft” Tips
There are able to absorb more impact, causing the tip to remain on the ball for a fraction of a second longer. This causes a greater spin on the cue ball. If you’re the kind of player who likes to move the cue ball on the pool table, you should use a soft tip. you’ll need. Unfortunately, the softer tips are more likely to “mushroom” and need maintenance more often.
3. Phenolic Tips
These are constructed from carbon fibers and are as solid as the ball that holds them. This kind of cue tip is commonly used on billiard cue sticks which are used to break. Phenolic tips transmit the highest amount of energy when they touch and require minimal maintenance.
4. Tip Tips that are Hard
These take less energy when struck which results that the ball spinning less. Even though harder tips last longer, they require less maintenance, and offer players some stability due to the fact that they are less energetic at contact, this cue tip tends to cause mistakes.
Also Read: How To Buy A Pool Cue?
Now you’ve got a greater understanding of the various types of cues and the way they work on billiard tables’ time to choose the right method for your type of play.
Conclusion
The best tip for your cue is one that suits your needs. However, if you want to get the maximum performance out of your cue, you need to know how to replace it. There are many different ways to do so, and each requires a unique set of skills. In this guide, I’ve shown you how to change the cue tip on your pool cue.
Also Consider: How Long is a Pool Cue?