Skip to content
Simply put, the joint is in which the butt and shafts of the cue meet. The joint could be constructed using any of a variety of different materials. Still, most commonly, joints are made of plastic (also called composite or phenolic), wood, and stainless steel.
The type of joint can alter the cue’s feel, and we’ll discuss this briefly. In most cues, you’ll notice that the male end of the cue is located on the butt, where the pin is. Connectors for females are usually found on the shaft on the cue.
Also Read: How to Clean Irish Linen Wrap On a Pool Cue?
Steel Joints
Built with stainless steel material, cues that have stainless steel joints offer what’s known as a hard strike, and it means you won’t feel it through the cue when you hit your ball. A few examples of steel jointed cues are Griffin, Joss and Schon.
Wood to Wood Joints
wood-to-wood joints are exactly those. The link between the butt and the Shaft is constructed from wood instead of plastic or steel. This joint provides the sensation that is called soft or fluid.
That means that when you hit the ball, you’ll feel it through every cue. A wood-to-wood joint is more like the traditional house cue, and that’s why. Most Elite cues have wood-to-wood joints, like most hidden Pete cues such as Meucci 9701. Meucci 9701.
Composite Joints
Joints of composite materials like plastic typically have a strong or compact hit. In general, these cues are between the fluid feeling of wood against wood and the hard feeling of iron.
You May Consider Reading: Cheapest Carbon Fiber Pool Cue Shaft
Pin Sizes
The pin sizes commonly seen on joint for pool cues are 3/8 x 10 3/8 x 8 5/16 14 x 5 5, 16 x 18 and Uni-loc. The majority of them are visible in the picture shown here. At the same time, this is the majority of signals available today. There are always some exceptions.
Also read: How to Make a Pool Cue Case?
Methods to Measure Pool Cue Joints
There are many ways to gauge the pool’s size of the cue joint:
1- If you’d like to determine the length of threads on the inside, you could take the thread in inches, and you must start at the top of the thread and then move down to one inch.
2-There’s another method to determine or measure the size of the cue joint in a pool. This way, you can utilize the protector of the joint. Also, in the same manner, you can use a die for similar work. It is necessary to insert the pin into the die or the protector.
3. Another method that is scientifically proven to determine the dimensions of the cue joint in a pool is using an instrument called the vernier caliper. To do this, you need to put the joint into the vernier caliper and secure the scale that can be moved.
Types & Styles of Pool Cue Joints
The various types of pool cue joints are based on the material used to construct them. The types are as follows:
- Stainless Steel cue joints
- Cue joint composite
- Wood cue joints
Consider Reading: How to Clean Irish Linen Wrap On a Pool Cue?
1. Stainless Cue Joints made of Steel
Joss, Griffin, and Schon are the joints you can find made of stainless steel. If you’re professional and you are used to playing hard shots, it is recommended to choose your stainless steel joints.
The most appealing feature of this cue joint would be that it will not be damaged even if you hit hard.
2: Polymer cue joints. 2 3: Polymer cue joints
Some pool cues provide joints made of composite material made organically by the industry.
Composite material is the most for a hard hit to the ball when playing the game of billiards or snooker. The experience reviews are based on the stainless steel joints and joint woods.
The wood offers a comfortable feeling, while the steel offers a tough and stiff feel. The cues used for adventures come with various joints made from composite.
3: Wood cue joints
The connection between the shaft’s end and the butt’s end is not created by stainless steel or other expensive polymers but is made from wood. Because the texture of the wood is slightly soft, they are known as soft joints.
The joint is always a factor in the sensation when you strike your cue ball. If you choose to use the standard wood pool cue type, the sensation will be very soft, as it is reminiscent of the homemade cue.
You May Also Like To Read: Best Carbon Fiber Pool Cue
Measurement of the Pool Cue Joints
If your cue’s shaft is damaged during the game, it is important to know about the kind and dimensions of the cue joint. You can then determine the best alternative for your butt to ensure you don’t have to spend more money to purchase the entire pool cue. If you don’t know the exact dimensions of your cue’s joint, then you need to take your manufacturer with your butt so that they can customize the dimensions of your pool cue’s joint.
Most of the standard cue joints for the pool are 3/8×10 until 11. However, the size of this joint isn’t regarded to be 100. If you don’t know the exact dimensions of your cue joint, you might have to spend a lot of money to customize the shaft of your pin.
How can I determine the Joint as well as my joint pain?
Then, check the precise value of the vernier scale that is in line with the major scale. In contrast, If you own an electronic vernier caliper, look up the value given by the vernier caliper.
End of line
This article has covered the entire pool cue joint and its function in the game of pool, and we also discussed ways to determine the size of the pool joints. After reading this article, we hope you’ll know the exact dimensions of your cue joint size.
FAQ’s
Q.1 What is the Best Way to Measure a Pool Cue Joint Size?
The risk count for the joint is based on the inch, which begins at the top, goes down one inch, and is counted within an inch.
Q.2 What’s The Joint Diameter of the Cue of the Pool?
The typical pin sizes used in the Pool CUE Joint are; 3/8 10 x 3, 3/8 x 8, 5/16 x 14, and 5/16 18 in diameter.
Q.3 What Are The Different Cues for a Pool?
- Black
- Richard
- Capone
- Dishaw
- Drexler
- Espiritu
- Falcon
- Ginacue